Working with roofing shingles to re-shingle your home roof can be dangerous. Follow these instructions to a safer task that is easy to do and will give a professional looking result.
Safety precaution must be taken seriously when you are up working on the roof. Let someone know of your project or better have a person to work with you. Use a proper ladder that is sturdy and high enough to do the job. Securing your ladder at the top and bottom is a wise thing to do. When working near power lines, use extreme caution and never touch them or let a metal ladder get in contact with them.
Determine the materials that you need for the job. Roofing shingles are sold in squares. Measure the length and width of each area of the roof to find out the total square feet of shingles needed. You will also need roofing nails. Follow the manufacturer’s recommendation to know which type of nails to be used. You will need to get cement for edges, ridges and flashings too.
Selection of shingles depends on the type and grade of asphalt shingles you need for your home or building. Factor in the purpose of the building or home, the slope of the roof, weather conditions, design, style and size of the structure. The manufacturer will provide you with the exposure for each type of shingle.
Before you begin, it is necessary to fix any existing problematic roof structures and remove any loose nails. Prior to the application of new asphalt shingles, you will need to have a layer of roofing felt over plywood sheathing. Install a starter strip by using one that is provided by the manufacturer or have it done by cutting the tabs off the shingles and use them to form the starter strip. You are now ready to lay the new roofing shingles.
At the end of this article, I’d like to share cool websites with more information on topics like Roofing Cost and Wood Siding Estimate. Visit for more information.